OnAirAviation · Experimental
Decode ADS-B with an SDR
OnAir receives ADS-B. ADS-B / Mode S: aircraft on 1090 MHz.
What ADS-B is
ADS-B is the transponder broadcast aircraft use to announce their identity, position, altitude and speed on 1090 MHz. It is deliberately open, which is why flight trackers can show planes on a map.
Frequencies and where it is used
Aircraft transponders, 1090 MHz.
In OnAir the tuning shortcut is Aircraft, 1090 MHz; you can enter any frequency your radio reaches.
What OnAir shows for ADS-B
Aircraft on a map, with altitude, speed and callsign.
This receiver is built from the published specification and checked end to end on simulated signals. It has had little or no testing on real transmissions yet, so reports and recordings on Discord are welcome.
Which radio you need
Any radio that tunes this range works. An RTL-SDR covers roughly 24 MHz to 1.7 GHz, and every other radio in the radio guide reaches it too. Antenna height and a clear view of the transmitter matter most.
Questions about ADS-B
Can I decode ADS-B with an RTL-SDR?
Usually yes for narrowband signals, as an RTL-SDR tunes roughly 24 MHz to 1.7 GHz at up to about 2.4 Msps. Wide signals such as TV channels need a faster radio, and OnAir says next to the source what the selected radio can do.
Is it legal to receive ADS-B?
Receiving aircraft broadcasts is legal in many countries, but some restrict listening to or using what you hear. OnAir is a receiver. Check the rules where you live.
Can I try ADS-B in OnAir without a radio?
Yes. Most modes include a built-in synthetic test signal, so you can open the screen and try the controls before you own a radio.
Try it without a radio
OnAir includes built-in synthetic test signals for most modes, so you can open this screen, see the layout and try the controls before you own a radio. The Tour button walks you through the app.